Submission Preparation ChecklistAs part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
- The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
- The submission file is in OpenOffice, Microsoft Word, or RTF document file format.
- Where available, URLs for the references have been provided.
- The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
- The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines.
Instructions to Authors
The Journal of Scientific Research and Development (JSRD) is published bi-annually. The Editorial board presides over the journal policy in the following sections:
Results of Original Research: Contributions should be original. Papers being considered for publication elsewhere will not be accepted. Manuscripts must be clearly presented in the style of the Journal. Submitted manuscripts shall be sent to at least two experts in the respective fields to referee
Review Papers: Review articles should be on important scientific methodology and industrial development. There should be prior consultation with the Editors before embarking on a review.
Letters and Viewpoints: Letters to the Editor Section is provided mainly for the timely announcement of significant new results and discoveries. Though concise, letters to the Editor should be restricted to two (2)-typed pages in order to speed up the refereeing process.
Short Communications: Reports on preliminary work and findings in Science, Technology and Industry. Evaluation of newly developed products and technologies will also be accepted.
Book Review: Review of new books on Science, Technology and Industry.
Contributors are advised to present their paper(s) in the following style of the Journal:
Submission/Organisation of Manuscripts: Typescripts should be submitted using the e-platform of the journal. Please visit http://jsrd.unilag.edu.ng, register as an author and submit your manuscript following the instructions on the website. Alternatively, kindly email the full manuscript to the Editor-in-Chief at firstname.lastname@example.org.
Typescripts should be typed in English language, double-spaced with 2 cm by 2 cm margins on A4 sheets, Times New Roman font and 12 point size.
Pages should be numbered consecutively beginning with the Title page. The first page of the paper should contain (1) the title of the paper, the name(s) and address(es) of the author(s), (2) a short title not exceeding 45 letters and spaces and (3) the name and mailing address of the corresponding author to whom correspondences and proofs should be sent; including telephone, fax, telex and e-mail address.
In view of demand for space, authors are requested to drastically condense their manuscripts, not only as far as the text is concerned but also regarding the figures and tables. The Editor-in-Chief reserves the right to adjust style and acknowledgements to certain standards of uniformity.
Abstract: The abstract should be informative and completely self-explanatory; briefly present the topic, state the scope of the experiments, indicate significant data, and point out major findings and conclusions. The abstract should be 50-200 words in length. Complete sentences, active verbs and passive tenses (third-person tenses) should be used. It should be written in the past tense. Standard nomenclature should be used and abbreviations should be avoided. No literature should be cited in the Abstract. The Abstract should follow the Title page on a separate sheet. 3'5 keywords that will provide indexing references should be listed following the abstract.
Text: Headings and subheadings should be clearly indicated. Units of measurement, abbreviations and symbols should follow the international systems of units (SI). Equations and formulae should be typewritten wherever possible. Equations should be numbered consecutively with Arabic numerals in parenthesis on the right-hand side of the paper.
Introduction: It should provide a clear statement of the problem, the relevant literature on the subject, and the proposed approach or solution. It should be understandable to colleagues from a broad range of scientific disciplines.
Materials and Methods: This should be complete enough to allow experiments to be reproduced. However, only truly new procedures should be described in detail; previously published procedures should be cited, and important modifications of published procedures should be mentioned briefly. Trade names should be capitalised and manufacturer's name and address included. Subheadings should be used.
Results: They should be presented with clarity and precision. The results should be written in the past tense when describing findings in the authors' experiments. Previously published findings should be written in present tense. Results should be explained, but largely without referring to the literature. The discussion, speculation and detailed interpretation of data should not be included in the Results section but should be placed in the Discussion section.
Discussion: In this section, please interpret the findings in view of the results obtained in present and past studies on this topic. State the conclusions in a few sentences at the end of the paper.
*The sections on Results and Discussion can include subheadings and, when appropriate, both sections can be combined.
Tables and Figures: Figure legends should be typed in numerical order on a separate sheet. Graphics should be prepared using applications capable of generating high resolution GIF, TIFF, JPEG or PowerPoint before pasting in the word processor (Microsoft Word) manuscript file.
Tables should be prepared in a word processor (Microsoft Word). Arabic numerals should be used to designate figures and upper case letters for their parts (e.g., Figure 1). Begin each legend with a title and include sufficient description so that the figure is understandable without reading the text of the manuscript. Information given in legends should not be repeated in the text. Tables should be kept to a minimum and as simple as possible. Tables are to be typed double-spaced throughout, including headings and footnotes. Each Table should be on a separate page, numbered consecutively in Arabic numerals and supplied with a heading and legend. Tables should be self-explanatory without reference to the text. The same data should not be presented in both table and graph form or repeated in the text. Coloured photographs will attract extra page charges.
References: The Harvard system should be used for the references. In this system, names and dates are given in the body of the text and an alphabetical list of references at the end of the typescript. References in the text should give the author's surname with the year of publication in parenthesis. When reference is made to a work by two (2) authors, both names should be given. Reference to works by more than two (2) authors should give the name of the first author, followed by et al., e.g., Bayo et al. (1990). If several papers by the same author(s), published in the same year, are cited, a, b, c, etc., should be placed after the year of publication, e.g., Bayo and Musa (1990a,b).
List of References:
Journals: References to articles from journals should be given in this order: name(s) of author(s), year of publication in parenthesis, full title of the article, title of the periodical (italized), volume number (bold), first and last relevant page numbers, e.g.,
Bayo, A. O. (1990). An experimental study of underground explosions. J. Phy. 2: 23 - 21.
Books: Reference to articles from books (or to whole books) should be given in this order: name(s) of author(s), year of publication in parenthesis, full title of the article, title of the book:(volume number, if applicable), initials followed by name(s) of the editor (if any), name and location of the publisher, first and last relevant page numbers, e.g.,
Jones, R. and Baker, A. A. (1982). Composite reinforcement of cracked aircraft components. In: The Application of Mathematics in Industry, Andersen, R. S. and De Hoog, F. R. (Eds.). Martinus Nijhoff, The Hague, 306pp.
If a publication is in press, the reference should be made as complete as possible stating the name of the Journal and adding (in press).
The list of references should be typed in alphabetical order of the first author's name. When a number of publications by the same author are cited the order should be: (1) single author references in date order, (2) two authors references in alphabetical order of the second author, and (3) et al. references in date order.
List of Referees:
Authors are requested to submit, with their manuscripts, a list of a minimum of three (3) potential experts who are qualified to assess their work. This list should include the Referee's full name, current contact details and area(s) of specialisation. The JSRD reserves the right to contact the authors' nominees.
Proofs: Proofs will be sent to the corresponding author to check typesetting accuracy. No changes to the original typescript are accepted at this stage. Proofs should be returned within seven days of receipt.
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.